The Aqua Pro Acid assists with balancing the pH and Total Alkalinity levels of your pool water, this muriatic acid kills mould, removes rust stains, gets rid of calcium deposits, and cleans the surfaces of your pool.
How to Add Acid to your poo in order to reduce pH? (based on a 50 000 litre pool):
1. The Pool Team recommends only adding 250ml of Aqua Pro Acid per dose. It is important to test the water after each dose to determine if another dose is necessary.
2. Always remember to get the basics right first: Test the water; clean out the weir and pump baskets; backwash and rinse. This is to ensure that you obtain the best results from the products added.
3. Dilute 250ml of Aqua Pro Acid into a bucket of water
4. Pour the diluted acid through the weir with the system on bypass/circulate.
5. Ensure that the pool is on circulate for at least 3 hours in order for the acid to fully circulate through the pool. Re-test the pH after 3 hours and if it is still high, repeat the process.
How do I use Acid to reduce Alkalinity in my pool? (based on a 50 000 litre pool):
1. Always remember to get the basics right first: Test the water; clean out the weir and pump baskets; backwash and rinse. This is to ensure that you obtain the best results from the products added.
2. Turn off the pool system and pour 1 litre of Aqua Pro Acid into the deep end of the pool.
3. Leave the pool system off for approximately 4 to 6 hours.
4. Turn your system back on and allow the water to circulate while the alkalinity levels adjust.
5. Retest the alkalinity levels the following day and if it is still high, repeat the process.
